• Serial Number: The serial number assigned to this terminal.
• Attachment Code: The Attachment Code selected for the terminal on the Terminal Setup page appears here by default.
• MIF Location Code: The Merchant Information File Location Code for the terminal appears here by default; this is an alternative identifier for a terminal within a BIN. If the BIN has been set up for MIF processing, you can click the adjacent Change MIF button to change this code.
• D/C Dial Maximum Count: The number of times that the terminal will attempt to dial the EDC phone numbers to transmit a batch.
• D/C Current Batch Number: The three-digit batch number that the terminal will be set to after a partial or full download is completed. Typically, the default value is used for this field. It is usually easier to change the batch number in terminal memory field 078. When the batch number is changed through this field, it is easy to forget to reset this field back to 001. Therefore, when a download occurs the batch number resets to whatever was left in the field.
• Transaction Prim 1 Key/Prime 2 Key: The option selected from the drop-down list indicates the type of transactions that the terminal can perform on the 1 and 2 keys respectively. The available options are:
  • L556/L556: This option allows the merchant to only perform swiped-card transactions on the 1 and 2 keys.
  • L556/L558: This option allows the merchant to perform swiped-card transactions on the 1 key (L556) and Mail/Phone Order transactions on the 2 key (L558).
  • L558/L558: This option allows the merchant to only perform Mail/Phone Order transactions on the 1 and 2 keys.
• Idle Prompt: The text that will display on the terminal when it is not in use. The terminal will display the current date and time when this field is left blank.
• Static IP Info Present: When selected, this check box indicates that the terminal uses a static IP address.